Window Washing Process · Temecula
Our Window Washing Process: 7 Proven Steps to Spot-Free Glass
From the first phone call to the final walk-through, here is exactly how a 5-Star window washing visit works, so you know what to expect before we arrive.
✓ Free quote by phone ✓ Price confirmed before we start ✓ Free re-clean guarantee
QUICK ANSWER
Our window washing process has seven steps: a free phone quote, scheduling, arrival and walk-around, screens and tracks, exterior washing with purified water, interior washing by hand, and a final walk-through with you. A typical Temecula home takes two to five hours. The price is agreed before we start, and every visit is backed by a free re-clean guarantee. Call (951) 744-8208 for a free quote over the phone.
What Are the Steps in Our Window Washing Process?
Every window washing process should be predictable. These are the seven steps we follow on a full-service residential visit; exterior-only and commercial visits use the same order with the interior steps left out.
1. Free quote by phone
You call, describe the property, and get a price. Rough window counts or square footage are enough.
2. Scheduling
We agree a day and arrival window, and note gate codes, pets and any deadlines.
3. Arrival and walk-around
We walk the property with you, confirm what is included and point out anything unusual, such as a cracked pane or a failed seal.
4. Screens and tracks first
Screens come off and are washed. Tracks and sills are vacuumed and wiped so dirt cannot run onto clean glass.
5. Exterior glass
Windows and frames are scrubbed with a soft brush on a water-fed pole and rinsed with purified water that dries spot-free.
6. Interior glass
Inside panes are washed by hand with a strip washer and squeegee, with towels down to protect floors and sills.
7. Walk-through
Screens go back, and we check the work with you before we leave.
Why Does the Order of the Window Washing Process Matter?
The sequence is not arbitrary. Each step in the window washing process protects the one after it.
Screens and tracks come first because they hold the most loose dirt; if they are cleaned last, that dirt ends up on finished glass. Exteriors are done before interiors so that any water pushed through a weep hole or under a frame is wiped up during the inside clean. Frames are rinsed with the glass so they do not drip dirty water down a clean pane an hour later. The walk-through comes last, in daylight, because that is when streaks show.
Which Tools and Methods Do We Use at Each Stage?
| Stage | Tool or method | Why |
|---|---|---|
| Exterior glass | Water-fed pole and soft brush | Reaches upper floors from the ground |
| Exterior rinse | Purified (deionized) water | Dries without mineral spots |
| Interior glass | Strip washer and squeegee | Streak-free finish, no overspray |
| Edges and corners | Lint-free microfiber | Removes the last drips |
| Screens | Soft brush and rinse | Clears dust and pollen from the mesh |
| Tracks and sills | Vacuum, brush and wipe | Removes grit that holds water |
| Hard water spots | Glass-safe mineral remover after a test spot | Only used where it will work |
Learn more about pure water window cleaning and why windows streak.
How Long Does the Window Washing Process Take?
Most single-story homes take two to three hours for inside and outside; two-story homes take three to five. Exterior-only visits are roughly half that. Screens, hard water treatment and very tall glass add time. See how long window washing takes for a room-by-room guide.
How Should You Prepare Before We Arrive?
- Unlock side gates and let us know any gate codes.
- Move breakables off windowsills and clear a path to sliders.
- Open blinds and curtains.
- Keep pets in a separate room or let us know where they are.
- Tell us about windows that stick, cracked panes or fragile screens.
- Turn off sprinklers for the day so freshly washed glass stays dry.
What Happens After the Window Washing Process Is Finished?
We walk the property with you and fix anything on the spot. If you notice something later that day, the window washing guarantee gives you 24 hours to call for a free re-clean. We will also mention anything we found: a sprinkler head hitting the glass, a foggy dual-pane unit, a torn screen. Many customers then move to a regular schedule; see how often windows should be cleaned.
Is the Process the Same for Every Service?
The core window washing process is the same, with steps added for specialist work: a test spot and mineral treatment for hard water stain removal, residue removal for post-construction cleaning, roof-safe access for skylights and solar panels, and scheduled routes for storefronts and commercial buildings. See all window washing services or the cost guide.
What Do People Ask About Our Window Washing Process?
Do I need to be home during the window washing process?
For interior glass, someone needs to let us in. For exterior-only service you do not, as long as gates are accessible.
Do you wash the outside or the inside first?
Outside first, after screens and tracks, then inside. That way any water that comes through is wiped up during the interior clean.
Do you remove and clean the screens?
Yes. Screens are removed, washed and refitted as part of every full-service clean.
Will you protect my floors and furniture?
Yes. Towels are placed under windows being washed inside, and we use a squeegee, not spray, to avoid overspray.
What if I find a streak after you leave?
Call within 24 hours and we will re-clean it free under our guarantee.
How do I start?
Call (951) 744-8208 for a free quote. It usually takes a few minutes.
Helpful resources: FTC: hiring a contractor · City of Temecula · Rancho California Water District
Ready to Start? Step 1 Is a Free Phone Quote
Call now for a free, no-obligation window washing quote.